|Grade||Genuine Rolex||3a swiss||swiss||automatic|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Skeleton Dial|
Band Material: 316L. The watch band uses 316L to sweep the major material masters, and it has become the mainstream material of European and American high-end fashion jewelry.
Watch Case: 316L. The case is the most important part of the watch. 316L is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Case Back: Transparent. The transparent back cover is usually used to protect the watch movement from direct damage. These watch cases can also increase the durability and strength of the watch movement.
Crystal: Sapphire Crystal. Sapphire crystal is higher in impact resistance, air tightness and hardness than other materials, and the processing cost is also higher, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. Regarding this watch, hand design is silver-tone, that makes your watch luxury and funny.
Second Markers: Minute Markers around the outer rim. The minute mark around the outer edge of the glass is one of the most recognized design elements in all industries. The second mark is a small disc placed on the outside of the watch to indicate the time.
Dial Markers: luminous dot. According to research, the human eye is sensitive to light at night and is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this point will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Luminiscence: Hands and Markers. About the luminosity of the watch is hands and markers. As you can see in the pictures above.
Clasp: Deployment. We use a deployment clasp for the watch which makes it more convenient for you to wear the watch, and the appearance is more beautiful.
Water Resistance: 30 meters. As for the waterproof depth of the watch, it is 30 meters, which is fully enough for your daily life. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.